Baby phone activation, Baby phone call number, Information tone – Ericsson BS260 User Manual
Page 81
Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
80
Extra features
Baby phone activation
When you use the handset as a baby monitor place it somewhere in the baby’s
room so that it can easily pick up sounds.
To activate the baby phone:
Route:
Handset » BabyPhone » Activate
1.
Select
Activate
and press
Y E S
.
BabyPhone
or
BabyPhone Call Failed
is displayed. In the latter case, either the
phone number of the other end is incorrect or the other end is out of range.
2.
Wait for a connection and place the handset somewhere in the baby’s
room.
You can end a baby phone call by pressing
N O
.
Baby phone call number
During a baby phone call, the handsfree in the base station is used as the other
end by default. You can also select a handset as the other end.
To set the baby phone call number:
Route:
Handset » BabyPhone » SetPhoneNo
1.
Select
SetPhoneNo
and press
Y E S
.
The current baby phone number is displayed.
2.
Enter the internal telephone number of the handset or base station hands-
free to be used as the other end (
CL R
= delete).
3.
Press
Y E S
to confirm.
The baby phone call number is set.
Information tone
If the baby phone call is activated, the other end hears an information tone
every half a minute to confirm that it is working (default). You can switch off
the information tone if needed.
To enable or disable the information tone:
Route:
Handset » BabyPhone » InfoTone
1.
Select
InfoTone
and press
Y E S
.
The current setting is displayed.
2.
Use the
U P
or
D OW N
key to select the setting you want.
3.
Press
Y E S
to confirm.
The information tone setting has been changed.