Ericsson BS260 - Manual (Page 77)

Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
76 Blocking keys and extra security
To prevent unauthorized people from accessing vital settings on the base sta-
tion, they are secured by a PIN code. Each time you want to change these base
station settings, you must enter the PIN code. You cannot switch off this secu-
rity feature but you can change the base station PIN code. You change the set-
tings of the base station by using a handset connected to this base station.
See for the default base station PIN code “Overview PIN and other codes” on
page 78.
To change the PIN code of the base station:
Route: BaseStation » Settings » Basic » ChangePIN
1. Select Basic and press Y E S .
PIN: is displayed.
2. Enter the PIN code for the base station (see page 78) and press Y E S .
3. Select ChangePIN and press Y E S .
New PIN: is displayed.
4. Enter the four digits of the new PIN code and press Y E S .
Repeat PIN: is displayed.
5. Enter the new PIN code again press Y E S .
Either New PIN activated or Wrong new PIN is displayed. In the latter case, the
new PIN and the code you have just entered do not match.
You can write down the new PIN code in the space provided in “Personal base
station PIN code” on page 78.
If you enter an incorrect new base station PIN code three times in a row, the
handset leaves this menu option.
In other situations, if you enter an incorrect base station PIN code three times
in a row, the base station PIN code is invalidated and BaseStation Blocked is dis-
played. See below for resetting the base station PIN code.
CHANGING THE BASE STATION PIN CODE