Switching the handset on and off, Switching the handset on, Switching the handset off – Ericsson BS260 User Manual
Page 16: Attaching and removing the clip
Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
Getting started
15
While the handset is switched on, it is in standby mode. In standby mode, the
handset is ready to make or receive calls but consumes less energy. With a
fully charged battery, the handset can operate for about 100 hours in standby
mode. If you are not using the handset to make or receive calls, you can put
the handset in the base station to keep it fully charged.
Switching the handset on
Before you can use the handset you must switch it on:
•
Press
N O
for at least one second to switch the handset on.
The standby display appears. The number on the right-hand side is the
internal number of the handset on the base station.
After switching on, information is displayed. For more details see “Informa-
Switching the handset off
If you do not want to make or receive calls, you can switch the handset off.
To switch the handset off:
•
Press and hold
N O
until the display turns blank.
You cannot turn the handset off during a call.
If the handset is off and you receive an external call, the ring signal on the
base station still works. Press
N O
for one second to switch on the handset,
then
Y E S
to receive the call.
The handset has a clip which you can use to attach the handset to your clothes.
•
Attach the clip to the handset.
Do not press on the display!
Your handset is now ready for use.
To minimize wear and tear, we recommend that you do not remove the clip
from the handset too often. See also the drawings below.
SWITCHING THE HANDSET ON AND OFF
ATTACHING AND REMOVING THE CLIP
Home
1