Ericsson BS260 - Manual (Page 98)

Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
Extra features 97
To set the hook flash signalling method:
Route: BaseStation » Settings » Basic » PhoneLine
1. Select Basic and press Y E S .
PIN: is displayed.
2. Enter the PIN code for the base station (see page 78) and press Y E S .
3. Select PhoneLine and press Y E S .
The opposite of the current setting is displayed.
4. Scroll to either GoToFlash or GoToEarth . If the display shows:
• GoToEarth press N O because the base station is already set to hook flash
signalling.
• GoToFlash press Y E S to set the base station to hook flash signalling.
Flash Time: and current duration in milliseconds are displayed.
5. Enter the required duration ( CL R = delete; U P = move left; D OW N = move
right). The last digit automatically defaults to 0 .
6. Press Y E S to confirm.
Hook flash signalling and its duration are set.
Hook flash duration
If you use hook flash signalling, you may need to change the hook flash dura-
tion. To change this, you have to go back to earth signalling first and then
change the signalling method back to hook flash. See “Earth signalling” on
page 96 and “Hook flash” above for the corresponding procedures.
In general, you can transfer calls on a switchboard as described below. How-
ever, transferring calls may work differently on your switchboard.
To put a call on hold and dial another number, use the R key or the NewCall
menu option. If you do not know the number by heart, use the NewCall option.
With the R key
You are on the phone and want to transfer a call.
To transfer calls to another extension:
1. Press the R key to put the current call on hold.
You hear the dial tone of the switchboard.
2. Enter the number of the extension to which you want to transfer the call.
If the extension is available, you hear it ring. You can wait until the call is
answered.
3. Press N O to transfer the call, or press the R key to return to the caller.
TRANSFERRING CALLS