I cannot use the phone book. what is wrong – Ericsson BS260 User Manual
Page 111
Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
110
Reference
I hear a warning tone and the signal strength indicator is not
shown. What is wrong?
The handset is not connected to the base station. The handset is probably out
of range. Bring the handset back within range of the base station.
It is also possible that the handset has not been subscribed or that the subscrip-
tion has been cancelled. It could also mean that a base station other than the
one which you are close to has been selected. See “Subscribing handsets” on
page 91 and “Connecting to base stations” on page 99.
I hear a warning tone and the battery icon is flashing. What is
wrong?
The battery is almost flat. Put the handset in the base station to charge the
battery.
The red light on the base station is on. What is wrong?
Nothing is wrong. The external line is busy.
I cannot use the phone book. What is wrong?
To begin with, the phone book in the handset is empty. To make use of the
phone book, you have to add a few names and numbers. See “Adding name
There are no messages on the answering machine. Why?
Check that the answering machine is switched on. The green light on the top
of the base station and the message icon on the handset display should be on.
See “Switching on/off” on page 50.
I cannot hear anything through the base station loudspeaker.
Why?
The base station loudspeaker can be used during answering machine and base
station handsfree use. Make sure that the volume is set to an appropriate level.
Press the
VO L U M E
U P
button on the base station to raise the volume level.
See also “Playing through the base station loudspeaker” on page 68 for the
proper settings.
If I press the R key nothing happens or the call is ended. Why?
If you press the
R
key a signal is sent to the telephone network or switchboard.
You may have selected the wrong signalling method. See “Signalling meth-
ods” on page 96 for more information. If you have set hook flash as the signal-
ling method, the hook flash duration may be incorrect. Please refer to “Hook
flash” on page 96 for more details.