Adding tests – Epson Endeavor WG User Manual
Page 117
Adding Tests
If you want to add devices to the Items Detected list, follow
these steps:
1. Press
Tests. Youseethe Add
menu, such as the following:
Numeric Coprocessor
Diskette Drive B
Hard Disk Drive
Serial Port
Serial Port
Serial Port
Printer Port
Printer Port LPT3
Printer Test
LPT2 Printer Test
The Add menu lists the testable devices that the computer has
not detected as Enabled in your system. You also see any
devices that you deleted from the Delete menu in case you
want to
be able to test them.
2. Press
or
to highlight the device you want to add
and press
The device is removed from the Add
menu and added to the Execute list. You can add as many
devices as you want.
3. When you are finished adding devices, press
to select
Execute
and see the next section.
4-4
Running System Diagnostics