Epson Endeavor WG - Manual (Page 42)

Note
You can also change your password using the SETUP
program. See Chapter 2 of the Setup Guide for instructions.
Deleting a
Password
To delete your password, follow these steps:
1. If you do not have a hard disk, insert your system diskette
in drive A.
2. Turn on or reset the computer. At the key prompt, enter
your current password followed by a forward slash. For
example, if your password is 123, type:
3. Press A happy face character appears and then the
computer loads the operating system.
The next time you turn on or reset the computer, it does not
request a password and loads the operating system
immediately.
Note
You can also delete your password using the SETUP
program. See Chapter 2 of the Setup Guide for instructions. If
you do not know the password, see “Password Problems” in
Chapter 6.
Using Your Computer 1-25