Epson Endeavor WG - Manual (Page 138)

Power-on diagnostics error messages (continued)
Error code
Hard disk drive(s)
and controller
1760 Disk 0 parameter failure
1761 Disk 1 parameter failure
1770 Disk 0 parameter error
1771 Disk 1 parameter error
1780 Disk 0 failure
1781 Disk 1 failure
1782 Disk controller failure
1790 Disk 0 error
1791 Disk 1 error
t . .
device(s)
8601
8602
8603
Message
Auxiliary device failure
Auxiliary device reset failure
Auxiliary device interrupt
failure
Action
See “Hard Disk
Drive Problems”
See ‘Mouse
Problems”
The Computer Won’t Start
If your computer does not start when you turn on the power,
check the following:
1. Is the power light on? If not, remove any diskettes and turn
off the power. Make sure the power cord is securely
connected to both the AC inlet on the back panel and an
electrical outlet. Replace your main operating system
diskette or Reference diskette, if necessary, and turn on the
computer again.
Troubleshooting 6-5