Epson Endeavor WG - Manual (Page 63)

Inserting SIMMs
Follow these steps to install SIMMs:
1. Refer to the illustration on page 2-3 to locate the SIMM
sockets near the front of the computer.
2. Remove any long option cards that may be blocking your
access to the SIMM sockets. See page 2-18 for instructions.
3. Install your first SIMM in the socket labelled SIMM 1. Position
it at an angle so the components on the SIMM face the
inside of the computer), as shown below.
Installing and Removing Options 2-11