Epson Endeavor WG - Manual (Page 139)

If you turn off the computer, always wait at least 20
seconds before it back on. This prevents damage
to the computer’s electrical circuitry.
2. If the power light still does not come on, check the electrical
outlet for power. Turn off your computer, unplug the
power cord, and plug a lamp into the outlet. Turn it on to
see if the outlet supplies power.
3. If you installed or removed any of your system components,
such as a disk drive, check to make sure you have
reconnected all the internal and external cables correctly.
See Chapters 2 and 3 for instructions.
4. If the electrical outlet is working and all the connections are
secure but your computer still won’t start, contact your
Epson Servicer.
Note
If the computer starts but you can’t see anything on the
screen, see “Monitor Problems” on page 6-12.
The Computer Does Not Respond
If your computer locks up and does not respond when you
type on the keyboard, follow these steps:
1. Wait a few moments; some operations take longer than others
to complete. For example, the computer takes longer to sort
a database than to display the time. If your computer still
does not respond after a reasonable length of time, proceed
to the next step.
6-6 Troubleshooting