Honeywell SDC - Manual (Page 26)

Operation SDC / DHC
26 EN2H-0220GE51 R0308
4.1.2.7 "System information" button
Calls up system information, such as temperatures and counter
data.
The information on the outside temperature appears first after the
¤ button is pressed. Turning the input button î causes the
system temperatures and the counter and consumption states
and operating states of the connected system components to
appear. Pressing the input button
î causes the respective
setpoint values to appear.
Collector flow temperature: No setpoint
Solar tank temperature: No setpoint
Outside temperature: Averaged value
The displayed information (see the following example) is
independent of the installed or enabled system components and
control circuits.
¤
Exceptions
NOTE