Honeywell SDC - Manual (Page 42)

Operation SDC / DHC
42 EN2H-0220GE51 R0308
4.2.2.4.3.1 Copying switching time programs (days)
Block programming enables the switching times and cycle
temperatures of any day of the week to be copied
1 – To any days within the week (Mo, Tu, We, ..., Su)
2 – To all weekdays (Mo to Fr)
3 – To the weekend (Sa to Su)
4 – To the entire week (Mo to Su)
Calling up the copy function (days)
See flowcharts on pg. 44
► Press input button î to confirm the copy function.
► Turn input button î to select the source day (MO to SU) to be
copied.
The respective automatic program P1 (P2, P3) of the source
day is copied in the display with the time switch symbol and
the program index.
► Press input button î to confirm the source day.
The source day appears flashing.
► Turn input button î to select the following setting values and
confirm by pressing the input button î :
• The following target days (Mo to Su) individually
• All days of the week (1 to 7) as a week block
• All weekdays (1 to 5) as a weekday block
• The weekend days (6 to 7) as a weekend block
Acceptance is confirmed by acknowledging DAY COPY OK.
After acknowledgement, the following target days appear one
after another automatically with each additional press of the input
button
î and can be skipped and accepted if necessary.
Pressing the button causes an immediate return to the basic
display.
Only complete days with all cycles and temperature specifications
and the respective program can be copied.
Source day
Target day
NOTE