Honeywell SDC - Manual (Page 38)

Operation SDC / DHC
38 EN2H-0220GE51 R0308
Switching time programming (programs P2 and P3 disabled)
Upon accessing the menu-selection level, the "Timeprograms"
menu always appears first.
Enabling of programs P2 and P3 in the "System Parameters"
menu (see 4.2 Menu-selection level, pg. 31).
Select
heating circuit:
Select day
and cycle:
Change:
Temperature
End of
heating
Monitoring
Start of
heating
Mo-
Hcy-1
HC MC -1 MC -2 DHW
Mo-
Hcy-2 Mo-
Hcy-3
Only appears if there are switching
times in the second heating cycle.
Tu-
Hcy-1 Su-
Hcy-3
Default
time
We
Th
Fr
Sa
Return:
Return to the basic display:
3 s
Copy
circuit
Change:
Change:
Copy
day
HC Direct heating circuit
MC-1 Mixed heating circuit 1
MC-2 Mixed heating circuit 2
DHW Hot-water heating circuit
Hcy Heating cycle