Hitachi US7070447-001 - Manual (Page 70)

HiSpeed Switch Troubleshooting Guide
10-6 US7070447-001, Rev 01
Draft Level—Hitachi Confidential


and performance issues. If using static routes on the HiSpeed switch,
you must configure those routes on those directly connected switches
and routers. On the HiSpeed switch, use the following command:
/INET/SHOW >static
/INET/CONFIG/ROUTE/add
Problem: Cannot establish a telnet session to the switch.
Solution: The HiSpeed switch uses the well known TCP port 23 for Telnet. Verify
that the socket is in a ‘Listen’ state.
/INET/SHOW >iconnect:
CLI Commands
/INET/CONFIG/ipr Enables/disables Route Cache Forwarding.
/INET >ping <hostname>
[NumberofPackets]
Performs an ICMP echo request.
/INET >rlogin <hostname> Used when logging onto a Unix server.
/INET/CONFIG/ROUTE >
• ADD
• DEFAULT
• DELETE
• RMDEFAULT
Commands available for configuring static and
default routes.
/INET/SHOW >
• ARP
• ROUTE
• STATIC
• ICONNECT
• RTCACHE
Commands available for displaying Routing
tables, ARP cache, and TCP/IP connections.
/INET >stats
• FORWARD
• ICMP
• IP
• SNMP
• TCP
• UDP
Commands available for displaying IP statistics.