System tab – Hand Held Products 7900 User Manual
Page 102
8 - 18
System Tab
The System Settings tab controls logging and the port manger timeout period.
Field
Description
Log Level
These settings control the detail of the log messages generated by the Client. Each level is
cumulative. By default, all errors, warnings, and information events are logged. Each entry records a
severity code (of one [debug message] to four [error] asterisks), a time stamp, and a message.
•
Errors - only the most severe conditions are logged.
•
Warnings - less severe conditions are logged.
•
Information - all errors, warnings, and information events are logged. This is the default setting.
•
Debugging - creates a log message each time the Client detects or reacts to an event. Be advised
that log entries fill memory quickly if the Debugging level is chosen. Do not use the Debugging
option for a significant length of time because most internal operations generate messages.
Defaults
Tap this button to return log settings to the default settings.
Disable Wireless
Zero Config
Use this option only as directed by technical support.
Selecting this option disables other wireless utilities whether the Client is running or not. If not
selected, other wireless utilities cannot apply their settings to the wireless card while the Client is
running (although their status displays are usually unaffected). You will need to perform a soft reset
whenever this setting is changed.
Port Manager
Timeout
The interval at which the client polls the ports. This is used under different circumstances, for instance
after physical changes such as card removal or insertion have been detected. This value should not
be changed from the 10-second default unless so advised by technical support.