Hand Held Products 7900 - Manual (Page 71)

Dolphin® 7900 User’s Guide Rev F
10/16/07
6 - 15
Com Port Assignment Table
The Dolphin 7900 terminal ships with the com ports assigned as follows:
Com
Port
Assignment
1
Serial port; this is the 17-pin connector on the bottom panel.
See
I/O Connector on page 3-9.
2
Bluetooth Module
If there is no Bluetooth hardware installed on the terminal, this com port is unassigned.
3 Raw Infrared
4
Unassigned
5 USB virtual serial port
6
IrDA, if IrDA is enabled. If IrDA is disabled, this com port becomes available.
See
Verify That the IrDA Port is Enabled on page 7-5.
7, 8, 9
Unassigned; these are virtual com ports that are available for selection only when
connecting to devices that use virtual com ports, such as Bluetooth.