Logging, Logging -24, Wpa settings tab logging – Hand Held Products 7900 User Manual
Page 108
8 - 24
WPA Settings Tab
Logging
The event log is an ASCII text file named “LOG8021X.TXT” located in the directory defined by the WINDIR environment variable
(usually the Windows directory). The information the log records is determined by the log settings on the System tab.
The format of the entries is
Time Stamp
Message Text
The Refresh button at the bottom of the screen is used to update the log file while you are reading it. If the file gets too large, old
entries are automatically deleted.
If you wish to start with a blank file, exit from the Client (so the icon no longer appears at the lower right of the screen) and delete
the log file (log8021x) in File Explorer.
When you restart the Client, a new log file is created.
Field Description
WPA Mode
This drop-down list contains the following options:
•
Disabled - Do not enable WPA mode. This is the default selection.
•
WPA 802.1x - Enable WPA and obtain key information through the 802.1x protocol.
•
WPA PSK - Enable WPA with Pre-Shared Key (PSK) information entered in the field
below. This mode is used if the 802.1x protocol is not being used for authentication.
PSK pass-phrase
This field activates if you select WPA PSK in the WPA Mode drop-down list. Asterisks
appear as you type for increased security.