Hand Held Products 7900 - Manual (Page 70)

6 - 14 Rev F
10/16/07
Dolphin® 7900 User’s Guide
Connections Tab
The Connections tab enables you to manage your network connections.
Icon Tapping this icon…
Beam Enables you to verify and adjust the infrared settings of the IrDA port; see Using Infrared on page 7-5.
Connections Opens the connections manager; see Connections Manager on page 6-16.
Network Cards Enables you to access the Wireless and Network Adapters tabs; see Network Cards on page 6-17.
Radio Manager Enables you to enable and disable radios installed on the terminal; see Radio Manager on page 7-8.
Other Icons on the Connections Tab
Other icons appear on this window if your terminal is configured with specific network software, protocols, and/or radios.
802.11b Settings This icon appears only if an 802.11b radio and driver is installed on the terminal.
Tapping this icon enables you to configure your 802.11b radio; see
Wireless LAN (WLAN)
Communications with 802.11b on page 8-1.
IrDA This icon appears only if a Bluetooth radio and driver is installed on the terminal.
Tapping this icon enables you to disable or enable the IrDA port; see
Verify That the IrDA Port is
Enabled on page 7-5.
uPhone GPRS This icon appears only if a GSM/GPRS radio and driver are installed on the terminal.
Tapping this icon opens the GPRS settings; see
GPRS Settings on page 10-20.
Server-Assigned IP Addresses
All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).
Zero-Config Wi-Fi
The zero-config Wi-Fi feature of Windows Mobile is disabled on Dolphin 7900 terminals.