HP 3380 - Manual (Page 82)

7. Click OK to return to the HP LaserJet Scan dialog box.
8. Click Scan.
Note The options that you set in step 5 are for the current job only, unless you save them as a
Quick Set.
Scanning to the Readiris OCR software
1. Load the originals that are to be scanned face-up in the automatic document feeder (ADF)
input tray. Adjust the media guides to hold the originals in place.
OR
Lift the flatbed scanner lid and load the original that is to be scanned face-down on the
flatbed scanner with the top, left corner of the document at the lower-right corner of the
glass. Gently close the lid.
2. On the computer, click Start, select Hewlett-Packard, select hp LaserJet 3380, and then
select Scan.
OR
Press
START SCAN
on the device. HP LaserJet Scan software opens on the computer.
3. In the HP LaserJet Scan dialog box, select Send it to the Readiris OCR software.
4. Click Scan.
Note Readiris must be installed on the computer before the device can scan to the Readiris OCR
program. The software CD-ROM that came with the device includes the Readiris OCR
program.
70 Chapter 5 Scanning ENWW