HP 3380 - Manual (Page 98)

Replacing the pickup roller
See Ordering HP parts and accessories to order a new pickup roller.
To replace the pickup roller
CAUTION Failure to complete this procedure might damage the device.
1. Turn off the device and unplug the power cord. Allow the device to cool.
2. Open the print-cartridge door, and remove the print cartridge.
CAUTION To prevent damage, do not expose the print cartridge to light. Cover the print cartridge, if
necessary. Also, do not touch the black sponge transfer roller inside the device. Touching the
black sponge roller can damage the device.
3. Find the pickup roller.
4. Release the small, white tabs on either side of the pickup roller, and rotate the pickup
roller toward the front.
86 Chapter 7 Cleaning and maintenance ENWW