HP 3380 - Manual (Page 97)

Cleaning the pickup roller
If the device regularly picks up too many sheets of media or no sheets at all, you might need to
clean or replace the pickup roller. Before replacing the pickup roller, try to clean it. To clean
the pickup roller, follow the instructions below.
To clean the pickup roller
Remove the pickup roller as described in steps 1 through 5 of Replacing the pickup roller .
1. Dampen a lint-free cloth with warm water, and use it to clean the roller.
WARNING! Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on
any part of the device; these can damage the device.
2. Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
3. Allow the pickup roller to dry completely before you reinstall it in the device (see steps 6
through 9 of Replacing the pickup roller ).
ENWW Cleaning the pickup roller 85