Heritage Kayaks Heritage Series - Manual (Page 129)

124 DHCP Server Operation
deny unknown-clients;
The unknown-clients flag is used to tell the DHCP server whether or not to
dynamically assign addresses to unknown clients. Dynamic address
assignment to unknown clients is
allo wed by default.
bootp
allow bootp;
deny bootp;
The bootp flag is used to tell the DHCP server whether or not to respond to
BOOTP queries. BOOTP queries are allo wed by default.
booting
allow booting;
deny booting;
The booting flag is used to inform the DHCP server whether or not to
respond to queries from a particular client. This keyword only has meaning
when it appears in a
host declaration. By default, booting is allo wed, but if it
is disabled for a particular client, then that client will not be able to get and
address from the DHCP server.
8.4.4 Parameters
default-lease-time
default-lease-time tim e;
Time should be the length in seconds that will be assigned to a lease if the
client requesting the lease does not ask for a specific expiration time.
max-lease-time
max-lease-time tim e;
Time should be the maximum length in seconds that will be assigned to a
lease if the client requesting the lease asks for a specific expiration time.
hardware
hardware hardware-type hardware-addres s;
In order for a BOOTP client to be recognized, its network hardware
address must be declared using a
hardware clause in the host statement.
hardware-type must be the name of a physical hardware interface type.
Currently, only the ethernet and token-ring types are recognized. The
hardware-address should be a set of hexadecimal octets (numbers from 0
through ff) separated by colons. The hardware statement may also be used