Heritage Kayaks Heritage Series - Manual (Page 71)

66 Command Sets for Command Line Interface
3. isfs ls | flashfs ls
Syntax:
isfs ls
flashfs ls [-l]
Description:
The ls command allows a console user to list the files present in the
filesystem.
The FLASHFS ‘ -l ’ option displays more detailed information (logical
address within FLASH and linked list information).
Example:
ls
4. isfs rm
Syntax:
isfs rm <file>
Description:
The rm command allows the user to remove a file from the ISFS file
system. The memory used to store the file is freed .A subsequent
FLASHFS update will write the new, shorter, ISFS files into FLASHFS,
providing an implicit rm function for FLASHFS.
Note: If the file removed is the only file that would be stored in
FLASHFS as type ‘
fixed ’, the file will remain in FLASHFS as the
fixed file area will not be re-written during an update.
Example:
> isfs rm foo
5. flashfs update
Syntax:
flashfs update
Description:
The ‘ update ’ command instructs FLASHFS to update the FLASH
memory from the files contained in the ISFS file system.
Example:
> flashfs update