Heritage Kayaks Heritage Series - Manual (Page 98)

Heritage Series ADSL Bridge/ Router
93 Command Sets for Command Line Interface
“hostroutes” flag is off.
Example:
DSL> ip rip hostroutes off
22. rip killrelay
Syntax:
rip killrelay <relay>
Description:
Deletes a RIP relay. See “rip relay” for information on RIP relays.
23. rip poison
Syntax:
rip poison [off]
Description:
Sets or clears the “poisoned reverse” flag. If this flag is on,
TCP/IP performs “poisoned reverse” as defined in RFC 1058; see
that RFC for discussion of when this is a good thing. To see the state
of the flag without changing it, the “config” command must be
used.
Configuration saving saves this information. By default the
“poisoned reverse” flag is off.
Example:
DSL> ip rip poison
24. rip relay
Syntax:
rip relay <RIP version> <name> [<i/f> [<timeout>]]
Description:
Configures a RIP relay. RIP relays were designed as a means of using
RIP on a non-broadcast medium (currently, only IP-over-ATM); on
such an interface, TCP/IP will send RIP information individually to
each configured RIP relay, instead of broadcasting it. However, the
RIP relay support has not been recently tested and is not believed to
be reliable; furthermore, configuration saving does not save the RIP
relay configuration. On a non-broadcast medium, therefore, it is
preferable to use static (manually configured) routes.