Button and event programs, Control unit / switch press event buttons – Home Automation SECURITY SYSTEM User Manual
Page 54
DATE: 10/15
MMDD
↓
=DAY
Next, specify if the program will run once (on the specified date and then be deleted) or if the program will run every year on the
specified date (yearly).
RUN PROGRAM
1=ONCE
2=YEARLY
To change days, press the down arrow (DAY) key. You will be prompted to enter the day(s) that the program will be activated.
Press 1-7 for Monday - Sunday, 0 for Once, 8 for Weekdays, and 9 for Weekends, then ' # '.
DAY(S):
M-W-F--
1-7=MON-SUN
0=ONCE
Press the ' # ' key and the display will then return to the Edit Program menu:
EDIT
PROGRAM
1=WHEN 2=CMD 3=&COND
Button and Event Programs
Selecting 2 (BUTTON) from the Edit When menu sets up a program to be activated when a particular button is run or a particular
event occurs. The user is prompted to specify the button/event that activates the program:
BUTTON:
ENTER BUTTON #=MENU
↓
A specific macro button may be activated by entering the button number followed by the ' # ' key, or by using the arrow keys to
scroll through a list of buttons.
Pressing the ' # ' key first will bring up a menu of event button types:
BUTTON
TYPE
1=CTRL 2=SEC 3=ZONE
↓
4=ALL 5=ALARM 6=X-10
7=MISC
8=MSG
9=SWITCH
↑
After the event button is specified, the display returns to the Edit Program menu.
Control Unit / Switch Press Event Buttons
This Event Button is activated upon the following:
• When the specified Unit is turned on or off
• When the top-rocker or bottom-rocker is pressed on a UPB, RadioRA, or ALC switch
• When a button is pressed on a UPB 6-Button or 8-Button Keypad
• When a button is pressed on a RadioRA Master Control
• When a button is pressed on a ALC 4-Button Scene Switch Module
Press the 1 (CTRL) key to select the "When Command" for a control unit event.
UNIT:
ENTER UNIT
↓
The unit may be selected by entering the unit number followed by the ' # ' key or by using the arrow keys to scroll through a list of
unit names. Select the desired unit. Next, you are prompted to specify the event that activates the program:
WHEN
Porch
Light:
0=OFF 1=ON 2=SWITCH
50