Heartland 3530 User Manual
Page 29
26
Metro / Legacy Series
7.
Press increase symbol until desired delayed time true convection is set. (fast scrolling
begins after holding increase symbol key for over 5 seconds)
8.
To correct time set press increase or decrease as needed.
9.
Press start symbol to begin delayed time convection function. Display will show time
of day. At the start of the delayed time convection cooking cycle, the convection
indicator light will glow and temperature in oven will be displayed. Temperatures will be dis
played in increments of 5F or 5C until programmed temperature is reached.
10.
Once the temperature is reached, an audible signal will sound. Cooking will begin after desired
temperature is reached.
11.
At the completion of delayed time convection an audible signal is emitted and the oven will
shut off. The temperature display will go off as well as the convection indicator light.
The time of day will then be displayed.
12.
Press cancel symbol to end delayed time convection function at any time.
convection indicator light and temperature display will go off. Only time of day will be
displayed.
Note:
1.
To verify oven temperature, length of cooking time, or stopping time while the oven is
heating up, press convection for temperature,
cook time or
stop time
symbols respectively for length of time and end time. Information will be displayed for 5
seconds.