Heartland 3530 - Manual (Page 47)

44
Metro / Legacy Series
2
1
3
Interior Oven Rack
The oven rack is designed with stop-locks so
that when placed correctly on the supports it will
stop before coming completely out of the oven
and will not tip when placing or removing food.
To install:
1. Push the oven rack all the way to the
back.
2. Pull rack up slightly to disengage the
“feet” from the rack support.
3. Pull rack out of oven.
Clean with soapy water. To re-install, reverse
assembly procedure.
Rack Supports
The oven rack supports are designed to interlock
into the oven sides, but are easy to remove. To
remove:
1. Remove oven racks.
2. Remove nickel plated bolt from front and
back – located at the top of the support
rack.
Clean with soapy water.
( fig 21)
(fig 22)
Please note: Rack locations are described as “position 1” “position 2”, etc. Position 1 is the lowest
rack location, position 2 is the next rack location and so on.
The last available location in the rack (position 4) is to be used only with the “offset rack”. Do not use
a standard rack in this position.
The offset rack can also be used in position 1 to get closer to the element for quick browning of
bottom of foods, such as browning pizza or pie bottoms.