Heartland 3530 - Manual (Page 39)

36
Metro / Legacy Series
Lighting the Top Burners and
Grill
Range is equipped with a spark ignition system
that is electrically operated. Pushing in and
turning the knob to position 3 or lower will
provide best lighting results. When the knob is
turned, a distinct clicking noise will be heard.
After the burner lights, the clicking noise will
stop. Note: When lighting any one burner, all
burners will spark, but only the burner
selected will light. All models feature “auto-
reignition” – should the flame go out for any
reason, the ignitor automatically begins to spark
to re-ignite the burner. See “Reference” section
for manual lighting procedure.
Propane Stoves: a slight pop or flash may
occur at the burner ports for a few seconds after
the burner has been turned off. This “extinction
pop” is normal for propane gas, specially if the
cooling fan is operating at the time.
Top Burner and Grill Operation
Small Pot Ring / Trivet
Pot ring support is used when cooking on top
burners while using a small pot. It is located in
the accessory package inside the oven. The
trivet fits on any burner. Each channel fits on one
of 4 fingers on the burner grate. (see fig 13)
Dial
Burner - right dial
(fig 12)
(fig 13)
This channel fits on a finger
on the burner grate.
Note: Incorrect burner alignement will produce a
potentially dangerous flame and poor burner
performance (please refer to Fig 19 on page 36
for details)