Heartland 3530 User Manual
Page 31
28
Metro / Legacy Series
5.
Press increase symbol until desired cook time is set. (fast scrolling begins after holding
increase symbol key for over 5 seconds)
6.
To correct time set press increase or decrease as needed.
7.
Press
start symbol to begin timed convection bake function. convection and
cook time indicator lights will glow. After 5 seconds the time of day and temperature in
oven will be displayed. Temperatures will be displayed in increments of 5F or 5C until pro
grammed temperature is reached.
8.
Once set temperature is reached, an audible signal will sound. Cooking will begin after desired
temperature is reached.
9.
At the completion of timed convection bake an audible signal is emitted and the oven will shut
off. The temperature display will go off as well as the convection and
cook time
indicator lights. The time of day will then be displayed.
10.
Press cancel symbol to end timed convection bake function at any time.
convection indicator light and temperature display will go off. Only time of day will be
displayed.
Note:
1.
To verify oven temperature or length of cooking time while the oven is heating up, press
convection for temperature or cook time symbols for length of cooking.
Information will be displayed for 5 seconds.
8C. Delayed Time Convection Bake
(please read all steps prior to setting the delayed time convection bake function)
1.
Press convection symbol. (temperature is automatically set at 325F or 160C and the
convection indicator light begins to flash)
2.
Press bake symbol. (temperature is automatically set at 325F or 160C and the
bake indicator light begins to flash)
3.
Press increase or decrease symbols to change temperature setting. Temperature may
be set between 100F to 550F or 37C to 290C. (fast scrolling begins after holding
increase or decrease symbol keys for over 5 seconds)
4.
Press cook time symbol. (timer will display 00:00 and cook time indicator will
begin to flash)
5.
Press increase symbol until desired cook time is set. (fast scrolling begins after holding
increase symbol key for over 5 seconds)
6.
To correct time set press increase or decrease as needed.