Heartland 3530 - Manual (Page 32)

29
Section 4: Oven and Clock Operation
7. Press stop time symbol to set desired time for cooking to be completed. stop time
indicator will flash and clock will automatically display the time the oven would normally shut
off if its duration were not delayed. (for example, if cook time is set to cook for 2 hours
at 3 o’clock in the afternoon, then after pressing stop time the clock will automatically
begins after holding increase symbol key for over 5 seconds)
8. To correct time set press increase or decrease as needed.
9. Press start symbol to begin delayed time convection bake function. Display will show
time of day. At the start of the delayed time convection bake cooking cycle, the
convection indicator light will glow and temperature in oven will be displayed. Tempera-
tures will be displayed in increments of 5F or 5C until programmed temperature is reached.
10. Once the temperature is reached, an audible signal will sound. Cooking will begin after desired
temperature is reached.
11. At the completion of delayed time convection bake an audible signal is emitted and the oven
will shut off. The temperature display will go off as well as the convection indicator light.
The time of day will then be displayed.
12. Press cancel symbol to end delayed time convection bake function at any time.
convection indicator light and temperature display will go off. Only time of day will be
displayed.
Note:
1.
To verify oven temperature, length of cooking time, or stopping time while the oven is heating
up, press convection for temperature, cook time or stop time symbols
respectively for length of time and end time. Information will be displayed for 5 seconds.