Heartland 3530 - Manual (Page 45)

42
Metro / Legacy Series
Ports
Important: tab must
be locked in position
on the burner base
Surface Burners
Top burners require little care other than to wipe
off the head of each burner. With usage, burner
rings may discolor (rates of discoloration will
vary) - this is normal and does not affect burner
performance. If a boilover occurs, the burner
part can be easily lifted out so burner port holes
can be cleaned in hot soapy water with a soft
brush. There are no bolts or screws to remove.
The igniter must also be kept clean to ensure
quick positive starts. When replacing, be sure
the tab is locked securely in position on the
burner base otherwise random sparking and
uneven flame will occur (Fig 19). For normal
or everyday cleaning of light spills, wipe the
burner parts with a damp cloth. For heavy duty
cleaning—cooked spills, oil stains, etc., scrub
with a tub and tile type of cleaner. Rinse thor-
oughly after every cleaning operation. Wipe
away excess water . Avoid using abrasives on
the burner base, as they may damage the finish
on the burner base. Remove all water from the
burner ports before lighting the burner (water in
ports will lead to random sparking)
Oven Light Replacement
Before replacing oven lights, disconnect the
power at the main fuse or circuit breaker panel.
When replacing light bulbs wait until the oven
and bulb are cool. Using your fingertips, remove
oven light lens by simply prying the glass cover
off. Place your finger on the top edge and pry
downward. The Halogen bulb can easily be
pulled out. A new bulb must be free of grease or
it will break after very short usage. Use alcohol
to clean the grease off bulb.
Nickel Plated Parts
These may be cleaned with any non abrasive
chrome and metal polish or Windex and a soft
cloth. If any acid based food or liquid, such as
lemon juice or tomato juice, is spilled on the
range, wipe it at once to prevent staining.
Surface Burner
(fig 19)