Heartland 3530 - Manual (Page 51)

48
Metro / Legacy Series
Power Failure Operation
If electrical power is interrupted, meals can still
be cooked on the top burners of the Heartland
gas/electric range. The oven will be inoperable.
By following these simple directions you will be
able to use the top burners without the benefit of
electricity.
Caution: Make sure your hands and clothing are
clear of the burner when lighting it!
Manually Lighting the Burners
1. Remove cast grate, for unobstructed
access to the burner head.
2. Hold a flame source to the desired
outside burner head. We recommend a
barbecue lighter as a flame source.
3. Push in and turn the corresponding
control knob to the medium setting.
4. After the burner lights, adjust flame size
as required.
5. Carefully replace cast grate. Keep
fingers clear of the flame.
Manually Lighting the Grill
1. Remove porcelain grill.
2. Place a flame source (barbecue lighter)
through the mesh near the back of the grill
burner. Turn the back control to the
medium position (3).
3. Repeat this for the front grill burner. Do
not attempt to light front burner by using
the lit back burner.
Please note that the “auto reignition” feature will
not function without electricity. Pay close atten-
tion to any burners in use while electrical power
is interrupted!
Gas Trouble Shooting
If you smell gas:
Check for loose connections. Connections may
become loose in transportation. Range connec-
tions must be perfectly tight, otherwise there
may be a small leak and therefore a faint gas
smell. Some leaks can only be found with the
controls in the “on” position, exposing the user to
serious burns. Never use a match or flame to
locate a leak.
Finding a gas leak is not a “do it yourself” proce-
dure. If you smell gas, turn off the supply of gas
to the range and call for service.
If you have other problems:
Before any component is replaced, follow this
four-step check list. Then consult “Gas Trouble
Shooting Chart” on the next page.
1. Be sure problem is not due to improper
operation.
2. Check basic adjustments – correct
pressure, dirt in the line, etc.
3. Ensure correct gas setting used. Setting
should be set for either propane or natural
gas.
4. If gas pressure and all adjustments seem
correct, use the following chart to help
identify the problem and/or malfunctioning
component.
If you still require help...
Contact your dealer and/or service techni-
cian. Should you still require help, see
the “Reference” section on how to contact
Heartland Appliances.