System covers, Primary access panel – HP DL120 User Manual
Page 32
Advertising
Removal and replacement procedures 32
System covers
Primary access panel
The main chassis area is protected by the primary access panel. This panel must be removed to
access the internal components and the system board cable connections of the system drives.
To remove the primary access panel:
1.
Perform steps 1 through 4 of the pre-installation procedure.
2.
Remove the primary access panel.
a.
Loosen the primary access panel thumbscrew (1).
b.
Press the panel’s release indentations (2) and push backward to release the panel from the
chassis (3).
c.
Remove the primary access panel from the chassis (4).
3.
Place the primary access panel in a safe place for reinstallation later.
Advertising