HP DL120 User Manual
Page 66
Advertising
Removal and replacement procedures 66
To install the Lights Out 100c remote management card:
1.
Perform the pre-installation procedure.
2.
Locate the Lights-Out 100c module connector on the system board.
3.
Remove the Lights-Out 100c blank bracket.
a.
Remove the remote management port cover (1).
b.
Position the module between the USB and video ports (2).
c.
Attach the module to the CN6 connector (3).
d.
Secure the module with the two screws that came with the module option kit (4).
4.
Perform the post-installation procedure.
Advertising