HP DL120 User Manual
Page 72
Advertising
Removal and replacement procedures 72
5.
Connect the PSU cables.
IMPORTANT: Check the PSU cable label before connecting them. Go to page 36 for a
reference figure on proper PSU cable connections.
a.
Secure the ATX power cables to the chassis cable tie (1).
b.
Connect the ATX power cables to their system board connectors (2).
c.
Route the system drive power cables through the center wall, and then secure them to the
chassis cable tie (3).
d.
Connect the power cables of all installed system drives (4).
6.
Perform the post-installation procedure.
Advertising