HP DL120 - Manual (Page 76)

Diagnostic tools 76
Setup Utility navigation keys
Use the following keyboard keys to work your way through the various menu and submenu screens of
the Setup Utility.
Key Functions
← and → To move between selections on the menu bar.
↑ and ↓ To move the cursor to the field you want.
The currently selected field will be highlighted. The right side of each menu screen
displays the Item Specific Help panel. This panel displays the help text for the currently
selected field. It updates as you move the cursor to each field.
PgUp and PgDn To move the cursor to the previous and next page of a multiple page menu.
Home To move the cursor to the first page of a multiple page menu.
End To move the cursor to the last page of a multiple page menu.
(+) , (–), and <Space> To select a value for the currently selected field (only if it is user-configurable).
Press the (+), (–), or <Space> keys repeatedly to display each possible entry, or the
Enter key to choose from a pop-up menu.
A parameter that is enclosed in square brackets [ ] is user-configurable.
Grayed-out parameters are not user-configurable for one of the following reasons:
The field value is auto-configured or auto-detected.
The field value is informational only.
The field is password-protected.
Enter To select a field value or display more options for menu marked with ►.
Ctrl+Enter To expand all device lists.
F1 or <Alt+H> To bring up the General Help window.
The General Help window describes other Setup navigation keys that are not displayed
on the legend bar.
Esc or <Alt+X> If you press this key:
On one of the primary menu screens, the Exit menu displays.
On a submenu screen, the previous screen displays.
When you are making selections from a pop-up menu, closes the pop-up without
making a selection.
F9 Loads the default system values.
F10 Saves changes and closes the Setup Utility.