Hawking Technology HNC320G - Manual (Page 26)

26
x Camera Name: This field is used to enter a descriptive name for the device. The default setting for the
Camera Name is CS-xxxxxx, where “xxxxxx” constitutes the last six digits of the device’s MAC Address. The
maximum length is 32 characters (printable ASCII).
x Location: This field is used to enter a descriptive name for the camera’s location.
x Admin: The fields in this section are used to enter the administrator’s name (“Admin ID”) and password. The
administrator’s ID and password will allow the user to access and configure the System Administration settings.
Be sure to enter the password twice to confirm the details, once in the Admin Password field and again in the
Confirm Password field.
The default settings for both the administrator user name and password are blank
(or null string). The
administrator name (“Admin ID”) has a maximum length of 12 (printable ASCII) characters and the
administrator password has a maximum length of 8 (printable ASCII) characters.
It is highly recommended that you set the Admin ID and Admin Password as soon as possible to enable
security options for the camera.
NOTE: If you would like to create a user account that only has access to the video image, but not the system
administration settings, you can do this in the “User” page of the Configuration section. Instructions on how to
create such a user are provided in the pages that follow.
x LED Control: This option allows users to set up the LEDs, as desired. This feature provides flexibility when
surveillance activity is ON.
There are three options, and they are as follows:
Normal
Power - Steady On
Link - Steady On
Note: When there is LAN activity, the LED
indicator will flash steadily.
OFF
Power - LED indicator is off.
Link – LED indicator is off.
Dummy
Power - Steady On
Link - Steady On, with random flashing.
The default setting for the LED control is Normal. When you have configured the LED controls, the correct
illumination will set after 1 minute.