Hawking Technology HNC320G - Manual (Page 49)

49
PPPoE – If your application requires a direct connection from an ADSL modem through the camera’s RJ-45
LAN port, click this option and enter the User ID and Password into the respective boxes. (You should have an
ISP PPPoE account.) The camera will get an IP address from the ISP when it starts up.
x DNS IP Address: A DNS (Domain Name System) server is an Internet service that translates domain names
into IP addresses. Enter at least one DNS IP Address in this field.
x Dynamic DNS: The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname in
any of the domains, allowing your computer to be accessed more easily from various locations on the Internet.
x Second HTTP Port: The default port for communication is via port 80, and you can change it according to
your network configuration. Select Enable from the option and enter the desired port number in the
appropriate box.
The Second HTTP Port field allows you to open a second port for the network camera. This will permit users’
routers to support multiple network cameras. By default, Port 80 (on the router) is always open for network
camera web server access.
For example, assume you have five network cameras to be installed, with the following IP addresses:
192.168.0.101
192.168.0.102
192.168.0.103
192.168.0.104
192.168.0.105
You can open the second port for each network camera, from port 81 to Port 85, as illustrated below:
Internet Camera 1 – IP 192.168.0.101, second web port 81
Internet Camera 2 – IP 192.168.0.102, second web port 82
Internet Camera 3 – IP 192.168.0.103, second web port 83
Internet Camera 4 – IP 192.168.0.104, second web port 84
Internet Camera 5 – IP 192.168.0.105, second web port 85
You also need to setup your router for Port Mapping.
Port 81 map to 192.168.0.101
Port 82 map to 192.168.0.102
Port 83 map to 192.168.0.103
Port 84 map to 192.168.0.104
Port 85 map to 192.168.0.105
Save/Cancel:
After making sure that all settings in the System are correct, click on the “Save” button to store the settings for
the network camera. You can alternatively click on the “Cancel” button to restore all settings to the values last
saved to or retrieved from the network camera.
x UPnP: UPnP is the architecture for pervasive peer-to-peer network connectivity of intelligent appliances and
PCs of all form factors. Check the Enable option to enable the function on your camera.