Hawking Technology HNC320G - Manual (Page 36)

36
Reset
“Do you really want to reset this device?” Click the Yes button for this option, and you can restart the camera. (This is
equivalent to physically turning the camera off and on again; your settings will stay saved. If you do not want to reset the
camera, exit this window without clicking Yes.
Factory Reset
“Do you want to restore this device to factory default setting?” If you click the Yes button for this option, you can restore
all the factory default settings for the camera. If you do not want to restore the factory settings, exit this window without
clicking Yes. Please NOTE that you have to configure the network settings again after a Factory Reset.
Firmware Upgrade
When a new firmware upgrade is available, you can upgrade it through this window. Click the “Browse…” button to
locate the firmware file, and then click Update to start upgrading.