Hawking Technology HNC320G User Manual
Page 68
68
This section describes the operation of the IPView SE application User Interface with detailed explanations of procedures
for using the application. IPView SE is responsible for management of the preview, configuration, and search of each
camera. It incorporates a user-friendly interface for ease of control and navigation, as illustrated below.
IPView SE Control Panel
Minimum – Minimizes the control panel.
Close – Closes the control panel.
Play – Plays back the recording file.
.
Scan – Searches for all network cameras available on the LAN. (At minimum, this function will locate any
Hawking cameras that have the code “HCVT” located beneath the UPC code on the product packaging or within
the serial number that appears on the white sticker label of the product. However, this function may be able to
locate other network cameras on the LAN that do not have this code.)
Combine – Combines all display windows into one window.
About – Displays information about the IPView SE application.
System Config
Add Camera
Minimum
Play
Close
Scan
About
Combine