Connect using ethernet, Connect using bluetooth – HP 3200 User Manual
Page 31
Note
If you have a Mac, you should use one of the built-in USB ports to
connect with the HP All-in-One. If you connect the HP All-in-One to a USB
card installed on a Mac, the HP software might not recognize the HP All-in-One.
To check the USB port speed on your computer (Windows XP)
Note
Windows versions prior to XP support USB 1.1 only.
1.
On the Windows taskbar, click
Start
, and then click
Control Panel
.
2.
Open
System
.
3.
Click the
Hardware
tab, and then click
Device Manager
.
4.
Check the list for an enhanced USB host controller.
If you have an enhanced USB host controller, then you have High Speed USB
(USB 2.0). Otherwise, you have Full Speed USB (USB 1.1).
To check the USB port speed on your computer (Mac OS X)
1.
Open the
System Profiler
from the
Applications:Utilities
folder.
2.
Click
USB
on the left.
If the
Speed
is
Up to 12 Mb/sec
, then you have Full Speed USB (1.1). A higher
speed indicates High Speed USB (USB 2.0).
To change the rear port speed to Full Speed (HP All-in-One)
1.
Press
Setup
.
The
Setup
menu appears on the color graphics display.
2.
Press until
Tools
is highlighted, then press
OK
.
The
Tools
menu appears.
3.
Press
5
, then press
2
.
This displays the
USB Speed
menu and then selects
Full Speed (USB 1.1)
.
Connect using Ethernet
Your HP All-in-One supports both 10 Mbps and 100 Mbps Ethernet network
connections. For detailed instructions on connecting your HP All-in-One to an
Ethernet (wired) network, see the Setup Guide that came with your device. You can
also see
for more information.
Connect using Bluetooth
®
A Bluetooth
®
connection provides a quick and easy way to print images from a
Bluetooth
®
-enabled computer without using a cable. However, with a Bluetooth
®
connection you will not be able to use other features from your computer such as scan
and HP Instant Share.
Before you print, you must connect an HP Bluetooth
®
adapter to your HP All-in-One.
For more information, see the onscreen
HP Image Zone Help
that came with your
HP All-in-One. For information on using the onscreen
HP Image Zone Help
.
Chapter 3
28
HP Photosmart 3200 All-in-One series
Finish
setup