HP 3200 - Manual (Page 42)

– 4. 100-Full
– 5. 100-Half
Change IP settings
The default IP setting for the IP settings is
Automatic , which sets the IP settings
automatically. However, if you are an advanced user, you might want to manually
change the IP address, subnet mask, or the default gateway. To see the IP address
and subnet mask of your HP All-in-One, print a network configuration page from your
HP All-in-One. For more information on printing a configuration page, see
View and
print network settings . For a description of the items on the configuration page,
including the IP address and subnet mask, see Network configuration page definitions .
Caution Be careful when manually assigning an IP address. If you enter an
invalid IP address during the installation, your network components will not be
able to connect with the HP All-in-One.
1. Press Setup .
2. Press until Network is highlighted, then press OK .
The Network Menu appears.
3. Press 3 , press 2 , and then press 2 again.
This selects Advanced Setup , then IP Settings , and then displays the Manual
IP Settings screen.
4. Press the number next to the IP setting:
–
1. IP Address
– 2. Subnet Mask
– 3. Default Gateway
5. Enter your changes, then press OK when done.
Use the Embedded Web Server
If your computer is connected to an HP All-in-One on a network, you can access the
Embedded Web Server that resides in the HP All-in-One. The Embedded Web Server
is a web-based user interface that provides some options not available on the HP All-
in-One control panel, including advanced network security options. Also, the
Embedded Web Server enables you to monitor status and order printer supplies.
For information on how to use the features available in the Embedded Web Server,
see the onscreen help within the Embedded Web Server. To access Embedded Web
Server help, open the Embedded Web Server, then click the
Help link under Other
Links on the Embedded Web Server Home tab.
Note Only use the Embedded Web Server to change network settings if you
cannot access the HP All-in-One control panel, or you need to change an
advanced option not available on the control panel.
Access the Embedded Web Server
You can only access the Embedded Web Server on a computer connected to an
HP All-in-One on a network.
1.
Press Setup .
User Guide 39
Network setup