HP 3200 - Manual (Page 70)

Note Each photo on the memory card or storage device has a number
assigned to it by your HP All-in-One. This photo number is located in the
bottom-right corner of the photo when it is currently shown on the color
graphics display. The number to the left of the forward slash (
/ ) is the
photo number. The number to the right of the forward slash represents the
total number of photos stored on the memory card or storage device.
4. Press OK .
5. Enter the last photo you want to select in the range by using the keypad, or by
pressing the or to scroll to the number you want to select.
6. Press OK .
All photos you specified in the range are selected. A check mark appears next to
the selected photos and videos.
Select a single video frame
You can select a single video frame stored on a memory card or storage device on
the control panel to print.
To select a single video frame
1.
Insert a memory card into the appropriate slot on your HP All-in-One, or connect
a storage device to the front USB port.
2. Press or to scroll to the video file you want to select.
3. Press 2 .
The video begins to play.
4. Press 2 again to pause the video when the video advances close to the frame
you want to print.
5. Do one of the following:
–
Press 1 to advance forward through each video frame until the frame you
want to print appears on the color graphics display.
– Press 3 to move backward through each video frame until the frame you
want to print appears on the color graphics display.
6. Press OK .
A check mark appears next to the selected video frame.
Note You can select up to 10 video frames.
Deselect photos and videos
You can deselect individual photos and videos, or deselect all photos and videos
located on a memory card or storage device.
➔ Do one of the following:
– Press OK to deselect the currently selected photo or video shown on the
color graphics display.
– Press Cancel to deselect all photos and videos and return to the idle screen.
User Guide 67
Photos
and
videos