Use the embedded web server setup wizard, General network settings, Subnet mask, see – HP 3200 User Manual

Page 43

Advertising
background image

2.

Press until

Network

is highlighted, then press

OK

.

The

Network Menu

appears.

3.

Press

1

, then press

1

again.

This selects the

Network Settings

menu and then prints a configuration page for

your HP All-in-One, including the IP address. You will use the IP address in the
next step.

4.

In the

Address

box in your Web browser on your computer, type the IP address

of the HP All-in-One, as shown on the network configuration page. For example,
http://192.168.1.101.
The Embedded Web Server

Home

page appears, showing information for the

HP All-in-One.

Note

If you are using a proxy server in your browser, you might need to

disable it to access the Embedded Web Server.

5.

If you need to change the language displayed in the Embedded Web Server, do
the following:
a.

Click the

Settings

tab.

b.

Click

Select Language

in the

Settings

navigation menu.

c.

In the

Select Language

list, click the appropriate language.

d.

Click

Apply

.

6.

Click the

Home

tab to access device and network information, or click the

Networking

tab to access more network information or to modify network

information.

7.

Make any configuration changes.
For more information see

Use the Embedded Web Server setup wizard

.

8.

Close the Embedded Web Server.

Use the Embedded Web Server setup wizard
The network setup wizard provided in the Embedded Web Server gives you an
intuitive interface to your network connection parameters. For more information on
how to open the Embedded Web Server, see

Access the Embedded Web Server

.

1.

Click the

Networking

tab.

2.

Click

Wired (802.3)

in the

Connections

navigation menu.

3.

Click

Start Wizard

, and then follow all of the wizard instructions.

Network configuration page definitions

The configuration page shows the network settings for the HP All-in-One. There are
settings for general information, 802.3 wired (Ethernet), and Bluetooth

®

.

For information on how to print a network configuration page, see

View and print

network settings

. For additional information on terms used here, see the Network

Glossary in the onscreen

HP Image Zone Help

that came with your HP All-in-One.

For information on using the onscreen

HP Image Zone Help

, see

Use the onscreen

Help

.

Chapter 4

40

HP Photosmart 3200 All-in-One series

Netw

ork

setup

Advertising
This manual is related to the following products: