HP 3200 - Manual (Page 53)

For more information on scanning slides and negative film, see Scan slides or
negative film .
Replace the Slide and Negative Film holder and the lid backing
After you remove the slide or negative film, replace the holder and the lid backing in
the lid.
To replace the Slide and Negative Film holder and the lid backing
1.
Place the bottom tabs of the lid backing in the slots at the bottom of the lid.
2. Rotate the lid backing up until the catch snaps firmly into place.
3. Place the bottom notch of the Slide and Negative Film holder under the tab at the
right bottom corner of the lid.
4. Lift the spring-loaded catch so that it connects with the notch on the holder.
Chapter 5
50 HP Photosmart 3200 All-in-One series
Load
originals
and
load
paper