HP 3200 - Manual (Page 99)

color blocks continue to show print quality problems after cleaning and
aligning, contact HP customer support.
– Bluetooth information: lists the settings for the optional Bluetooth device.
– History log: contains information that might be used for diagnostic purposes
if you need to call HP customer support.
Work with ink cartridges
To ensure the best print quality from your HP All-in-One, you will need to perform
some simple maintenance procedures. This section provides guidelines for handling
the ink cartridges, and instructions for replacing the ink cartridges, aligning the printer,
and cleaning the print head and ink cartridge contacts.
Replace the ink cartridges
When the ink level for the ink cartridge is low, a message appears on the color
graphics display. When you receive this message, make sure you have a replacement
ink cartridge available.
To find out the reorder number for all the ink cartridges that your HP All-in-One
supports, see
Order supplies . To order ink cartridges for your HP All-in-One, go to
www.hp.com/learn/suresupply . If prompted, choose your country/region, follow the
prompts to select your product, and then click one of the shopping links on the page.
To replace the ink cartridges
1.
Open the ink cartridge access door by lifting from the front center of the device,
until the door locks into place.
2. Squeeze the tab below an ink cartridge to release the latch inside the HP All-in-
One, and then lift the latch.
If you are replacing the black ink cartridge, lift the latch on the far left.
If you are replacing one of the five color ink cartridges, such as yellow, light cyan,
cyan, light magenta, or magenta, lift the appropriate latch in the center area.
Chapter 12
96 HP Photosmart 3200 All-in-One series
Maintain your HP
All-in-One