High End Systems DL.2 - Manual (Page 206)

CHAPTER 15
Live Video Input and Control
184 DL.2 Digital Light User Manual
Live Video Connection Options
The DL.2 fixture has video connectors for RGBHV, VGA and S-Video on its rear panel, as shown
in the following figure.
CAUTION:
To avoid damaging the fixture and voiding the warranty, do not
physically connect to the RGBHV and VGA inputs at the same time.
USB 1
100-120 V;
50-60Hz; 7A
200-240 V;
50-60Hz; 3.5 A
USB 2
S-Video Camera
S-Video In to
the graphics engine
VGA input to
RGBHV input option
to the projector
Output to another
DL.2 fixture or device
the projector
Configuring the Video Input Source
DL.2 fixtures support multiple SVideo formats including:
NTSC_M PAL_B PAL_H SECAM_B SECAM_K
NTSC_MJ PAL_D PAL_I SECAM_D SECAM_K1
PAL_G PAL_M SECAM_G SECAM_L
PAL_N SECAM_H SECAM_L1
You will need to configure the DL.2 fixture to identify which video input source you have chosen.
The active input can be configured the following ways:
• Manually using the DL.2 menu system (see information about the Projector Input field on
the Set_Projector Screen on page 31.)
• Remotely through the CMA (see Editing Configuration Values on page 205)
• Via the DMX console commands (see Projector Control on page 181).
NOTE: The integrated cameras provides an NTSC_M video signal.