High End Systems DL.2 - Manual (Page 53)

CHAPTER 3
The DL.2 Menu System
DL.2 Digital Light User Manual 31
Note: After selecting the On or Preview option, you can use the numeric up/down control
to adjust the Menu display brightness level from 25 (dim) to 100 (brightest).
• Off turns off the display after 20 seconds of inactivity. Touching any button on the fixture
menu will re-enable the display.
The Display Invert field inverts the display and navigation control functions. This is useful in
certain fixture orientations. There are three invert control options:
• On manually inverts the display and navigation buttons
• Off manually turns off the display invert function
• Auto sets the display to invert automatically when the fixture is rotated more than 45% off
the horizontal axis. This is the default setting.
The Multiple SVideo Format field lets you designate which SVideo format the fixture will accept.
DL.2 fixtures support multiple SVideo formats including:
NTSC_M PAL_B PAL_H SECAM_B SECAM_K
NTSC_MJ PAL_D PAL_I SECAM_D SECAM_K1
PAL_G PAL_M SECAM_G SECAM_L
PAL_N SECAM_H SECAM_L1
Note: The format must be set to NTSC_M to receive input from the internal camera.
Restoring Factory Defaults
Selecting On in the Factory Defaults field restores all factory default fixture settings.
Set_Projector Screen
The projector tab provides settings related to
the internal projector functionality.
Use the Projector Input option to select
which input the projector should accept. When
External is selected, the projector takes input
directly from an external source and bypasses
the internal graphics engine. When Internal
is selected, the projector takes input directly
from the graphics engine. Internal is the
default configuration setting.
Setting the Projector In By DMX field to Yes
sets DMX as the projector’s input source.
The Projector Lamp field lets you manually turn the lamp On or Off.
Use the Projector Powerup to choose the control option for turning the lamp on. The options
are: ALWAYS ON, MANUAL, DMX. This only takes effect when the fixture powers up.
• Always On turns the projector lamp on when the fixture starts up regardless of whether
there is a DMX/Art-Net signal. If there is no DMX/Art-Net signal the lamp shuts off when the
shutdown timeout period expires.