High End Systems DL.2 User Manual
Page 274
APPENDIX A
DL.2 and Axon DMX Protocol
252
DL2 Digital Light User Manual
72
51
Effect
Mode 1
Sinewave, Circular with Y-axis Wobbulation
Mod1 = size, Mod2 = rate, Mod3 = offset
65
72
0
0
Sinewave, Circular with Z-axis Wobbulation
Mod1 = size, Mod2 = rate, Mod3 = offset
66
Sinewave, Horizontal with X-axis Wobbulation
Mod1 = size, Mod2 = rate, Mod3 = offset
67
Sinewave, Horizontal with Y-axis Wobbulation
Mod1 = size, Mod2 = rate, Mod3 = offset
68
Sinewave, Horizontal with Z-axis Wobbulation
Mod1 = size, Mod2 = rate, Mod3 = offset
69
Sinewave, Vertical with X-axis Wobbulation
Mod1 = size, Mod2 = rate, Mod3 = offset
70
Sinewave, Vertical with Y-axis Wobbulation
Mod1 = size, Mod2 = rate, Mod3 = offset
71
Sinewave, Vertical with Z-axis Wobbulation
Mod1 = size, Mod2 = rate, Mod3 = offset
72
Glow: Mod1 = red, Mod2 = green, Mod3 = blue
73
Glow Color Cycle: Mod1= red cycle speed, Mod2=
green cycle speed, Mod3= blue cycle speed
74
Reserved, defaults to Effect 0
75-79
Downward Vertical Streaks. Mod1 = start position,
Mod2 = streak angle, Mod3 = fade
80
Gaussian Blur. Mod1 = sample distance, Mod2 =
filter pass number, Mod3 = curve shape
81
Sharpen. Mod1 = sample distance, Mod2 = filter
pass number, Mod3 = sharpen scale
82
Reserved. Defaults to effect mode = 0
83-252
Spherical mapping control 1. Mod 1= projector y-
offset, Mod2=sphere y-offset, Mod3=vertical size.
(Defaults to 0 and is ignored unless Spherical
Mapping is selected as a Global Effect option)
253
Spherical mapping control 2. Mod 1= vertical bend
correction, Mod2=vertical bend correction center,
Mod3=horizontal size adjustment. (Defaults to 0
and is ignored unless Spherical Mapping is
selected as a Global Effect option)
254
Pan and Scan. Mod1 = horizontal position,
Mod2 = vertical position, Mod3 = Zoom
255
73
52
Effect Mode 1
Modifier 1
These Modifier parameters adjust the option
selected in Channel 72 for DL.2 fixtures or
Channel 51 for Axon Media Servers.
The type of adjustment and the default value
depends on the particular effect.
NOTE: Setting the Graphic Effect Mode DMX=
253 or 254 activates specific spherical mapping
control options for Modifier parameters. For more
about Modifier parameter functionality, see
1 Mode and Effect 2 Mode on page 100, and
specific effect options listed alphabetically in
Chapter 13.
0-255
0-100
NA
NA
74
53
Effect Mode 1
Modifier 2
0-255
0-100
75
54
Effect Mode 1
Modifier 3
0-255
0-100
Channel #
Function
Description
Value
Default
DL.2 Axon
dec.
%
dec.
%