Hughes DIRECWAY DW4020 - Manual (Page 125)

Appendix D • Configuring the installer laptop for IP addressing
1031484-0001 Revision 2.a
113
Appendix D
Configuring the installer laptop for IP
addressing
This chapter explains how to configure your installer laptop PC
so that you can register the DW4020. All DW4020s come from
the factory with Dynamic Host Configuration Protocol (DHCP)
enabled. Therefore, your installer laptop PC must have DHCP
enabled and set to automatically obtain IP addresses..
Windows 98SE and ME 1. On the client computer, go to Start →Settings→Control Panel
and double-click Network. See Figure 91.
Note: On Windows ME computers, choose View All Control
Panel Options to see the Network icon.
2. A list of network components will be displayed. See
Figure 92.
Figure 91: Control Panel